Disassembly - Isuzu 2000 Trooper Workshop Manual

Disassembly

1. Loosen the nut(1) on terminal "M" of magnetic switch
and disconnect the connector cable.
2. Remove bolt (2 pcs) (2).
3. Remove magnetic switch(5).
4. Remove dust cover(4).
5. Remove torsion spring bolts, then the magnetic
switch assembly.
6. Remove torsion spring(3) from magnetic switch
assembly(5).
STARTING AND CHARGING SYSTEM
7. Remove screw (2 pcs) (8).
8. Remove through bolt (2 pcs) (7).
9. Remove screws and through bolts, then the rear
cover(9) then remove thrust washer(10).
10. Remove brush holder(6).
065RW003
11. Raise a brush spring to detach brushes (4 pcs) from
the commutator face and pull off the brush holder(12)
and brush(11).
065RW004
6D3–7
065RW005
065RW006