Installation - Isuzu 2000 Trooper Workshop Manual

10. Remove side defroster nozzle.
11. Remove center defroster nozzle.

Installation

To install, follow the removal steps in the reverse order,
noting the following point:
1. Connect each duct and nozzle securely leaving no
clearance between them and making no improper
matching.
Center Vent, Drive Side Vent and Associated Parts
Legend
(1) Center Vent
(2) Meter Cluster Assembly
(3) Lower Cluster Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove front console assembly.
3. Remove lower cluster assembly.
4. Remove instrument panel driver lower cover
assembly.
5. Remove meter cluster assembly.
D Refer to Instrument Panel Assembly in Body and
Accessories section.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–25
Center and / or Drive Side Vent
(4) Front Console Assembly
(5) Instrument Panel Driver Lower Cover
Assembly
(6) Side Vent
6. Remove screws and the center vent from center
cluster while prying up the center vent catch portions.
7. Remove screws and the side vent from the center
cluster while prying up the vent catch portions.
Installation
To install, follow the removal steps in the reverse order.
740RS003