Isuzu 2000 Trooper Workshop Manual page 122

Indication
D The Auto LED maintains unaffected.
D Currently selected intake port is indicated.
MAX Control
MAX/COOL
MAX/HEAT
*1: In the A/C: OFF mode, FRESH shall be selected.
*2: The ON mode is available only when ON is selected
for the fan as well as for the cold outside air
ON/OFF selection.
*3: When the MAX control is selected from the DEF
mode, this DEF mode shall be maintained.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–93
F01RX007
Mix Fan
Full cool MAX/HI
Full hot AUTO/HI
Fan Switch
1. Sets the fan to the specified mode.
2. Even when the fan switch is turned off, status display
for the Mode, Intake is maintained.
Temperature Control Knob
1. This knob is operable only when the fan is turned on.
It may be used for the MAX control of each block
except the fan.
2. When the manual mode is selected for the fan control,
this manual mode is maintained.
Mode Intake
VENT REC*1
FOOT*3 FRESH
F01RX005
A/C
ON mode*2
Current status is
maintained