Disassembly
1. Terminal insulator and nut(2).
2. Remove three nuts(1) on the rear cover and a nut on
terminal B and insulator, then remove the rear
cover(3).
3. Remove two screws that fix the brush holder(5) and
rectifier, then remove the brush holder assembly(4).
STARTING AND CHARGING SYSTEM
4. Remove three screws on the IC regulator, then the IC
regulator assembly(6).
5. Remove four screws that fix rectifier(7) and stator
lead wires.
060RW005
060RW004
6D3–21
060RW003
066RW004