Disassembled View
Legend
(1) Front Companion Flange
(2) 4H and 4L Switch, Grounding Cable, and
Center Connector
(3) Offset Lever
Disassembly
1. Remove the drain plug from the transfer case and
drain the oil.
2. Disconnect the 4H and 4L switch and grounding
cable.
3. Remove the clip fixing the harness.
4. Remove front companion flange and using the flange
holder J-8614-11, remove the flange nut.
5. Remove rear companion flange and using the flange
holder J-8614-11, remove the flange nut.
Transfer Case
(4) Spring Pin
(5) Transfer Case Assembly
(6) Transfer Cover Assembly
(7) Rear Companion Flange
TRANSFER CASE (TOD)
4D2–9
266RW004
266RW005