Blower Assembly; Blower Assembly And Associated Parts - Isuzu 2000 Trooper Workshop Manual

1A–20 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)

Blower Assembly and Associated Parts

Legend
(1) Electro Thermo Connector
(2) Blower Motor Connector
(3) Resistor Connector
(4) Dash Side Trim Panel (RH)
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover
conditioning).
D Refer to Refrigerant Recovery in this section.
3. Remove instrument panel assembly.
D Refer to Instrument Panel Assembly in Body and
Accessories section.

Blower Assembly

refrigerant (with air
(5) Blower Assembly
(6) Duct
(7) Evaporator Assembly (A/C only)
(8) Heater Unit
(9) Instrument Panel Assembly
4. Disconnect resistor connector.
5. Remove duct.
6. Remove evaporator assembly (A/C only).
D Refer to Evaporator Assembly in this section.
7. Remove dash side trim panel (RH).
8. Disconnect blower motor connector.
9. Remove blower assembly.
873RY00003