Reassembly - Isuzu 2000 Trooper Workshop Manual

4A2–26 DIFFERENTIAL (REAR)
Clearance between the side gear and the differential
box.
Standard: 0.032 – 0.105 mm (0.001 – 0.004 in)
Limit: 0.105 mm (0.004 in)
Legend
(1) Side gear
(2) Differential box
Play in splines between the side gear and the axle
shaft.
Standard: 0.07 – 0.38 mm (0.003 – 0.014 in)
Limit: 0.5 mm (0.02 in)

Reassembly

Differential cage
Thrust washer
Side gear
Pinion gear
1. Install the pinion gear by engaging it with the side
gears while turning both pinion gears simultaneously
in the same direction.
2. Install the pinion mate gear with thrust washer by
engaging it with the side gears while turning both
pinion mate gears simultaneously in the same
direction.
425RY00005
3. Install differential shaft.
1. Be sure to install the differential shaft so that it is in
alignment with the lock pin hole in the differential
cage.
425RY00006
425RS048
425RS049