Differential Assembly; Differential Assembly And Associated Parts 4A2-12; Removal - Isuzu 2000 Trooper Workshop Manual

4A2–12 DIFFERENTIAL (REAR)
Differential Assembly and Associated Parts
Legend
(1) Bolt and Nut
(2) Axle Shaft Assembly

Removal

1. Jack up and support the frame with stands.
2. Remove the wheel and tire.
Steering section.
3. Drain the differential oil.
4. Remove the propeller shaft. Refer to Rear Propeller
Shaft in this section.
5. Remove the ABS speed sensor. Refer to 4–Wheel
Anti–lock Brake System (ABS) in Brake section.

Differential Assembly

Refer to Wheel in
(3) Parking Brake Cable
(4) Differential Assembly
(5) Nut
6. Remove the parking brake cable fastening clip and
disconnect the equalizer section. Refer to Parking
Brakes in Brake section.
7. Remove the bearing holder fixing nuts.
8. Remove axle shaft assembly, be sure not to damage
the oil seal by axle shaft.
9. Remove differential carrier mounting bolts and nuts.
10. Remove differential assembly.
425RY00004