Isuzu 2000 Trooper Workshop Manual page 268

REAR SUSPENSION
3D–8
Center Link and Associated Parts
Legend
(1) Center Link
(2) Bolt and Nut
Removal
1. Remove the speed sensor cable from the center link.
2. Remove the speed sensor cable bracket from the
frame.
3. Remove bolt and nut.
4. Remove center link.
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal conditions are
found through inspection.
1. Center link
2. Rubber bushing
D Remove the rubber bushing by using remover
J–39214.
Center Link
(3) Speed Sensor Cable Bracket
(4) Speed Sensor Cable
460RX001
901RW058