Isuzu 2000 Trooper Workshop Manual page 332

4A2–16 DIFFERENTIAL (REAR)
8. Removed flange assembly.
9. Remove the drive pinion assembly using a soft metal
rod and a hammer.
10. Remove collapsible spacer.
11. Remove the inner bearing by using remover
J–42379.Select insert 303174 and collet halves
44803 in remover kit J–42379 for inner bearing
removal.
12. Remove adjust shim.
13. Remove oil seal.
14. Remove oil seal slinger.
15. Remove outer bearing.
16. Remove the inner bearing outer race (1) and the outer
bearing outer race (2) by using a brass bar and a
hammer.
425RY005
415RW004
425RS014
425RS015