Isuzu 2000 Trooper Workshop Manual page 483

D Insert a wheel stud using a hammer.
Be sure the wheel stud is started squarely and
seats completely.
2. Align scribe marks(1) and attach the hub to the disc,
then tighten the bolts to the specified torque.
Torque: 103 N·m (76 lb ft)
3. Use installer J–36829 and grip J–8092, then install
the inner bearing by driving it into the hub.
4. Use installer J–36828 and grip J–8092 then install the
411RS005
outer bearing by driving it into the hub.
411RS003
DRIVE SHAFT SYSTEM
4C–13
901RW055
901RW056