Heater Core And / Or Mode Door - Isuzu 2000 Trooper Workshop Manual

1A–16 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Disassembled View
Legend
(1) Case (Temperature Control)
(2) Mode Door
(3) Duct
Removal
1. Disconnect the battery ground cable.
2. Drain the engine coolant.
3. Discharge and recover
conditioning).
D Refer to Refrigerant Recovery in this section.

Heater Core and / or Mode Door

refrigerant (with air
(4) Heater Unit
(5) Case (Mode Control)
(6) Heater Core
4. Remove heater unit.
D Refer to Heater Unit in this section.
5. Remove duct.
6. Remove case (Mode control) and do not remove link
unit at this step.
860RS001