Disassembly
1. Remove output shaft.
2. Remove detent spring.
3. Remove the cam pilot block set bolts.
4. Remove the cam pilot block assembly and cam
assembly.
5. Remove the spring pin that fixes the reduction hub
together.
6. Remove the spring pin that fixes the reduction fork.
7. Remove the reduction fork.
266RW011
8. Remove the lock-up roll.
9. Using snap ring pliers, remove the snap ring.
10. Remove the washer.
11. Remove the cam.
12. Remove the cam pilot block.
261RW019
TRANSFER CASE (TOD)
4D2–21
261RW020
261RW029