4B2–72
DRIVE LINE CONTROL SYSTEM (TOD)
Step
14
When the transfer lever is shifted to the 4L position, is the
continuity established between terminals (M-27)12 and GND?
15
When the transfer lever is shifted to the high position, is the
continuity established between terminals (M-27)12 and GND?
16
Check that all the parts are mounted.
Is this step complete?
Action
Yes
Repair the
assembly.
Go to Step 15
Go to Step 16
short-circuited
Repair the
terminals (H–17)6
transfer
and (M-27)12.
assembly.
Repair the circuit.
Go to Step 16
Go to Step 16
Repeat the
"Diagnosis Flow".
Return to Step 16
No
transfer
GND is
between