Isuzu 2000 Trooper Workshop Manual page 696

5C–46 POWER ASSISTED BRAKE SYSTEM
3. Install caliper assembly, use adjustable pliers to
bottom the piston into the caliper bore. Be careful not
to damage the piston dust boot and do not damage
the flexible hose by twisting or pulling it.
4. Install lock bolt (5) and tighten the bolt to the specified
torque.
Torque: 44 N·m (32 lb ft)
5. Install wheel and tire assembly, refer to "Wheels and
Tires System" in Section 3E.
6. Pump the brake pedal several times to make sure that
the pedal is firm. Check the brake fluid level in the
reservoir after pumping the brakes.
306RW005
302RS008
306RW006