Isuzu 2000 Trooper Workshop Manual page 549

4D1–28 TRANSFER CASE (STANDARD TYPE)
27. Install belleville spring. (M/T)
28. Install spacer and apply engine oil to the thrust
surfaces of the sub–gear, the belleville spring, and the
spacer. (M/T)
29. Install sub–gear snap ring. (M/T)
30. Install bearing collar, use a bench press to install the
needle bearing collar together with the front output
gear.
31. Install ball bearing.
32. Install bearing snap ring and select a snap ring that
will allow the minimum axial play.
Clearance : 0–0.1 mm (0–0.004 in)
Snap ring availability:
Snap ring thickness
1.55 mm (0.061 in)
1.60 mm (0.063 in)
1.65 mm (0.065 in)
1.70 mm (0.067 in)
1.75 mm (0.069 in)
1.80 mm (0.071 in)
1.85 mm (0.073 in)
1.90 mm (0.075 in)
262RW060
262RS014
Color coding
White
Yellow
Blue
Pink
Green
Brown
Red
Orange
262RS015
226RS021