Transfer Rear Oil Seal and Associated Parts
Legend
(1) Oil Seal
(2) End Nut and Rear Companion Flange
Removal
1. Uncouple the rear propeller shaft from the transfer
case.
2. Using the flange holder J-8614-11, remove the end
nut.
3. Using the universal puller, remove the rear
companion flange and O-ring.
4. Remove the oil seal from the transfer rear case.
Installation
1. Apply oil to the circumference of the oil seal. Fill the oil
seal lip with grease (Besco L2).
Transfer Rear Oil Seal
Legend
(1) Inside
(2) Outside
TRANSFER CASE (TOD)
4D2–5
261RW005
261RW006