Basic Inspection Procedure - Isuzu 2000 Trooper Workshop Manual

Basic Inspection Procedure

1. Basic Inspection of System Brake
Step
1 Is the fluid level normal?
2 Does fluid leak?
3 Is the booster functioning normal?
4 Is the pad and rotor normal?
5 Reconnect all components and ensure all component are
properly mounted.
Was this step finished?
2. Inspection of Front Axle Switch
Step
1 Turn the key switch on and shift to 4WD position by pressing the
4WD switch.
Does the 4WD light come on?
2 Reconnect all components and ensure all components are
properly mounted.
Was this step finished?
3. Ground Inspection
Step
1 Are ABS—related ground points ok?
2 Reconnect all components and ensure all components are
properly mounted.
Was this step finished?
Action
Action
Action
BRAKE CONTROL SYSTEM
Yes
Go to Step 2
Repair.
Go to Step 3
Go to Step 4
Go to Step 5
Finished
Yes
Go to Step 2
Finished
Yes
Go to Step 2
Finished
5A–7
No
Replenish with
fluid.
Go to Step 2
Go to Step 3
Repair.
Go to Step 4
Repair.
Go to Step 5
Go to Step 5
No
Repair.
Go to Step 2
Go to Step 2
No
Repair.
Go to Step 2
Go to Step 2