Installation - Isuzu 2000 Trooper Workshop Manual

5C–50 POWER ASSISTED BRAKE SYSTEM
10. Remove clip.

Installation

1. Install clip (4).
2. Install pad assembly (with shim) and apply special
grease (approximately 0.2 g) to both contacting
surfaces of the inner shims (5). Wipe off extruded
grease after installing.
Legend
(5) Inner Shim
(6) Wear indicator
3. Install support bracket and tighten the bolt (7) to the
specified torque.
Torque: 103 N·m (76 lb ft)
4. Install caliper assembly.
306RW010
5. Install lock bolt and guide bolt (8) and tighten the bolt
to the specified torque.
Torque: 44 N·m (32 lb ft)
306RW011
306RW012
306RW013