Installation - Isuzu 2000 Trooper Workshop Manual

7. Make a setting mark(1) across the coupling flange
and worm shaft to ensure reassembly of the parts in
the original position, then remove universal joint bolt.
8. Push the stabilizer bar aside and remove the gear box
mounting bolts and nuts.
9. Remove gear box.

Installation

1. Align the setting marks(1) made at removal, then
install gear box.
POWER ASSISTED SYSTEM
2. Tighten gear box mounting bolt and nut to specified
torque.
Torque: 44 N·m (33 lb ft)
431RW004
3. Tighten gear universal joint bolt to specified torque.
Torque: 25 N·m (18 lb ft)
4. Align the notched tooth and install pitman arm.
431RS004
5. Install nut and tighten Nut to specified torque.
Torque: 216 N·m (159 lb ft)
6. Install Pipe and tighten to specified torque.
Torque: 44 N·m (33 lb ft)
2A–21
431RW004
433RS006