Air Conditioning Switch And Illumination Bulb 1A-63; Air Conditioning Switch, Illumination Bulb And Associated Parts; Removal; Installation - Isuzu 2000 Trooper Workshop Manual

6. Be sure to install the sensor and the insulator on the
place where they were before.
7. To install a new evaporator core, add 50cc (1.7 fl. oz.)
of new compressor oil to the new core.
Air Conditioning Switch and Illumination Bulb

Air Conditioning Switch, Illumination Bulb and Associated Parts

Legend
(1) Control Lever Assembly

Removal

1. Disconnect the battery ground cable.
2. Remove control lever assembly.
D Refer to Control Lever Assembly in this section.
3. Lift up the catch portion (1) of the switch and remove
the air conditioning switch (2) while pushing it toward
the outside.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–63
8. Tighten the refrigerant lines to the specified torque.
9. Apply an adhesive to the parting face of the lining
(2) Illumination Bulb
(3) A/C Switch
4. Turn the illumination bulb counterclockwise to

Installation

To install, follow the removal steps in the reverse order.
865RS004
Refer to Main Data and Specifications for Torque
Specifications in this section.
when assembling the evaporator assembly.
remove.
865RS003