1A–134 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Heater (B–36), Thermostat (X–5), And
Compressor (X–7) Relay
1. Disconnect relays and check for continuity and
resistance between relay terminals.
D For handling of these relays, refer to Heater Relay
in this section.
Triple Pressure Switch (V6, A/T)
1. Disconnect the connector and check for continuity
between pressure switch side connector terminals (1)
and (2).
2. Reconnect the connector to activate the A/C switch,
and check to see if there is continuity between the
chassis side connector terminal (3) and (4) and the
fan operates.
901RY00041
875RX009