Disassembly - Isuzu 2000 Trooper Workshop Manual

Disassembly

1. Remove bearing snap ring, use a pair of snap ring
pliers to remove the snap ring.
2. Remove ball bearing, use a bearing remover J–37217
and puller J–37487 to remove the ball bearing.
3. Install the front companion flange temporarily.
4. Use the Companion flange holder J–8614–11 and
lock nut wrench J–37219 to remove the lock nut.
5. Remove the front companion flange.
6. Remove snap ring.
TRANSFER CASE (STANDARD TYPE)
7. Remove the input shaft assembly from the transfer
case.
8. Remove high–low clutch hub and sleeve.
9. Remove transfer input gear, use the universal puller
to remove the high–low clutch hub and sleeve, and
transfer input gear.
262RW016
10. Remove needle bearing.
226RW130
4D1–19
265RW001
226RS070