Inspection - Isuzu 2000 Trooper Workshop Manual

7. Remove case (Temperature control). Separate two
halves of core case.
8. Remove heater core (1).
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–17
9. Pull out the mode door while raising up the catch of
860RS002

Inspection

Check for foreign matter in the heater core, stains or core
fin damage.
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1. Check that each mode door operates properly.
860RS003
the door lever.
860RS004