Mode Actuator; Removal - Isuzu 2000 Trooper Workshop Manual

1A–138 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)

Mode Actuator

Legend
(1) A/T Control Unit
(2) Actuator Rod
(3) Mode Actuator

Removal

1. Disconnect the battery ground cable.
2. Remove the PCM.
D The connector shall remain connected.
3. Remove the actuator rod.
4. Remove the mode actuator.
Installation
To install, follow the remove step in the reverse order.
Mix Actuator
860RY00008
Legend
(1) Instrument Panel Assembly
(2) Actuator Rod
(3) Mix Actuator
(4) Instrument Panel Center Bracket
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel assembly.
D Refer to the Instrument Panel Assembly in Body
and Accessories section.
3. Remove the instrument panel center bracket.
4. Remove the actuator rod.
5. Remove the mix actuator.
Installation
To install, follow the remove step in the reverse order.
860RY00009