Power Transistor
Legend
(1) Evaporator Assembly
(2) Power Transistor
(3) Power Transistor Connector
(4) Instrument Panel Passenger Lower Cover
(5) Glove Box
(6) Front Console
(7) Lower Cluster
(8) Passenger Knee Bolster Reinforcement
Removal
1. Remove front console.
2. Remove lower cluster.
3. Remove glove box.
4. Remove instrument panel passenger lower cover.
5. Remove passenger knee bolster reinforcement.
6. Disconnect the power transistor connector.
7. Remove power transistor.
Installation
To install, follow the removal step in the reverse order.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–135
On-Vehicle Service
Automatic
Control Unit
874RY00010
Legend
(1) Connector
(2) Set Screw
(3) Instrument Panel Cluster
(4) Automatic Heater/Air Conditioner Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel cluster.
3. Disconnnect the automatic heater/air conditioner
4. Remove automatic heater/air conditioner control unit.
Installation
To install, follow the removal step in the reverse order.
Heater/Air
D Refer to Instrument Panel Assembly in Body
Stractur section.
control unit connector.
Conditioner
865RY00012