Reassembly - Isuzu 2000 Trooper Workshop Manual

Measure the Deformation of the friction disc & plate.
Limit: 0.1 mm (0.004 in)
Measure the wear of the friction plate & disc
Limit(A–B): 0.1 mm (0.004 in)
Remarks:
A=Inner or outer projections
B=Sliding surface subjected to abrasion
Measure the wear of the thrust washer
Limit: 1.3 mm (0.05 in)
425RS061

Reassembly

Adjust the clearance between the friction disc and plate.
1. Measuring the depth of the differential cage.
Standard (A–B):
425RS062
DIFFERENTIAL (REAR)
89.13 mm (3.51 in)
(C): 9.13 mm (0.36 in)
4A2–31
425RS063
425RS064