Fuel Line; Throttle Operation - Honda VFR800F 2014 Service Manual

MAINTENANCE
FUEL LINE
FUEL TANK LIFTING/LOWERING
Remove the following:
-
front seat (page 2-3)
-
side covers (page 2-4)
Remove the two socket
bolts [1] and
washers
[2].
Temporarily install the
removed socket bolt into
either
bolt hole
in
the frame.
Suppo(
the
fuel tank
[1] with the pin spanner
l2l and
extension
bar [3] of the tool
kit.
lnstallation
is in
the
reverse order of removal.
NOTE:
.
Be sure that the following hoses are not bent
or
!'?Xfi,l"o n","
-
fuel tank drain
hose
-
fuel tank{o-EVAP
canister hose (AC,
Il AC types)
- fuel
tank breather hose
(lll
CM type)
INSPECTION
Lift the fuel
tank and support it (page 3-4).
Check the fuel feed
hose
for
deterioration, damage
or
leakage.
Also,
check the hose fittings for
damage or looseness.
Replace the fuel feed
hose if necessary (page
7-S).
THROTTLE OPERATION
Check
for any
deterioration
or
damage
to the
throtfle
cable. Check the throttle grip
for smooth operation.
Check that the throttle opens and automatically
closes
in
all steering positions.
If
the throttle grip does not return properly, lubricate
and
overhaul the throttle
grip
housing
(page
15-1 1).
If
the throttle grip still does not return properly,
replace
the throttle cables.
With the engine idling, turn the
handlebar all the way to
the
right
and
left
to
ensure that the idle speed does
not
change.
lf
idle speed increases, check the throttle grip
freeplay
and throttle cable routing.
Measure
the throttle grip freeplay
at the throttle
grip
flange.
FREEPLAY:
2
-
6
mm (0.1 -
0.2
in)
3-4