Configuration Requirements - Polycom realpresence 1800 Administrator's Manual

RealPresence Collaboration Server 1800 - LAN 2 connection on Rear Panel
On the RealPresence Collaboration Server 1800, Management Redundancy is implemented using the LAN
1 and LAN 2 ports and is dependent on the settings of the LAN_REDUNDANCY and
MULTIPLE_SERVICES System Flags as summarized in the following table.
RMX 1800 - Management Redundancy - System Flags
Flag / Value
LAN_REDUNDANCY
MULTIPLE_SERVICES = NO
LAN_REDUNDANCY
MULTIPLE_SERVICES = YES
LAN_REDUNDANCY
MULTIPLE_SERVICES = NO
LAN_REDUNDANCY
MULTIPLE_SERVICES = YES

Configuration Requirements

LAN Redundancy is disabled by default and is enabled by changing the LAN_REDUNDANCY system flag
to YES and connecting the appropriate LAN cables to the LAN ports on the Collaboration Server as follows:
RealPresence Collaboration Server 1800
» Connect the additional LAN cable to LAN 2 port on the rear panel of the Collaboration Server 1800.
Polycom, Inc.
Port Usage
LAN 1
= NO Management
= NO Management
= YES Management, Media and Signaling.
= YES These flags cannot be set to YES simultaneously.
IP Network Services
LAN 2
Media and Signaling
Media and Signaling
LAN 2 is redundant to LAN 1
528