Alternative Network Address Types (Anat) - Polycom realpresence 1800 Administrator's Manual

ii When all the IP necessary addresses have been removed, click OK.
A message is displayed: Applying white list will limit RMX web access to the configured
IP list, are you sure you want to continue?
iii Click Yes to apply the modified White List.

Alternative Network Address Types (ANAT)

In compliance with UC_APL_NET_0007 Alternative Network Address Types (ANAT) is supported.
When the RMX is configured for IPv4 and IPv6 Addressing, the addition of the sdp-anat option tag in the
SIP Require and SIP Supported headers allows a mixture of IPv4 and IPv6 addressing to be specified by
the Session Description Protocol (SDP).
For a full description of ANAT see IETF RFCs 4091 and 4092.
Guidelines
● If the RMX is configured for both IPv4 and IPv6, IPv4 addressing is given preference when
establishing the connection.
● If an Outbound Proxy is configured, its transport type is used.
● If an Outbound Proxy is not configured, the SIP Server's (Registrar) transport type is used.
The Outbound Proxy and the SIP Server must be configured with one type only either according to
the IP address type or according to the DNS Resolution type. However, if the RMX is configured for
IPv4&IPv6 then the SIP Contact field will contain both IPv4 and IPv6 addresses.
System Flag
The ANAT Protocol selection is controlled by the ANAT_IP_PROTOCOL System Flag.
To modify it, manually add it to system.cfg and set its value as described in the table below.
Range: DISABLED, AUTO, PREFER_IPv4, PREFER_IPv6
Default:
 If the ULTRA_SECURE_MODE System Flag is set to NO: DISABLED.
 If the ULTRA_SECURE_MODE System Flag is set to YES: AUTO.
ANAT_IP_PROTOCOL System Flag Values for Dial in Dial out
Value
DISABLED
AUTO
Polycom, Inc.
Behavior - Dial in and Dial out
sdp-anat does not appear in SIP headers and the SDP does not contain a mixture of
IPv4 and IPv6.
If an endpoint requests ANAT (sends the Require: sdp-anat tag) the RMX will accept
the call.
sdp-anat appears in SIP headers.
Dial in: The IP Version preference is according to the SDP priority.
Dial out: IPv4 is advertised first.
Ultra Secure Mode
873