Special System Flags - Polycom realpresence 1800 Administrator's Manual

Special System Flags

Auto Layout Configuration Flags
The Auto Layout option lets the Collaboration Server automatically select the conference video layout based
on the number of participants currently connected to the conference. You can modify the default selection
of the conference video layout to customize it to your conferencing preferences.
The default Auto Layout is controlled by 21 flags:
PREDEFINED_AUTO_LAYOUT_0, ... , PREDEFINED_AUTO_LAYOUT_20
Each of the 21 Auto Layout flags can be left at its default value, or set to any of the possible values listed in
the following Default Auto Layouts table.
The flag that controls the Auto Layout you wish to modify must be manually added to the System
Configuration file.
The table below lists the available layouts, and indicates those used as defaults for each number of
participants. These defaults are the values of the system flags PREDEFINED_AUTO_LAYOUT_<n>.
Available Layouts
No. of
Participants Auto Layout Flag
0 PREDEFINED_AUTO_LAYOUT_0
1 PREDEFINED_AUTO_LAYOUT_1
2 PREDEFINED_AUTO_LAYOUT_2
3 PREDEFINED_AUTO_LAYOUT_3
4 PREDEFINED_AUTO_LAYOUT_4
5 PREDEFINED_AUTO_LAYOUT_5
6 PREDEFINED_AUTO_LAYOUT_6
7 PREDEFINED_AUTO_LAYOUT_7
8 PREDEFINED_AUTO_LAYOUT_8
9 PREDEFINED_AUTO_LAYOUT_9
10 PREDEFINED_AUTO_LAYOUT_10
11 PREDEFINED_AUTO_LAYOUT_11
Polycom®, Inc.
Layout Default Value
CP_LAYOUT_1X1
CP_LAYOUT_1x2VER
CP_LAYOUT_2X2
CP_LAYOUT_1P5
CP_LAYOUT_1P7
CP_LAYOUT_2P8
System Configuration Flags
807