Appendix I - Polycom Open Collaboration Network (Pocn) - Polycom realpresence 1800 Administrator's Manual

Appendix I - Polycom Open
Collaboration Network (POCN)
Collaboration With Cisco's Telepresence
Interoperability Protocol (TIP)
TIP is a proprietary protocol created by Cisco for deployment in Cisco TelePresence systems (CTS). Since
TIP is not compatible with standard video communication systems, interoperability between Cisco and other
vendors' Telepresence systems was initially impossible.
Gateways were developed to provide interoperability but were subject to the inherent problems of additional
latency (delay) in connections and low video quality resulting from the reformatting of video and audio
content.
Polycom's solution is to allow the Collaboration Server to natively inter-operate with Cisco TelePresence
Systems, ensuring optimum quality multi-screen, multipoint calls between:
● Polycom Immersive Telepresence Systems (ITP) Version 3.1.1:
 RPX 200
 RPX 400
 OTX 300
(At Telepresence Licence is required on the Collaboration Server.)
● Polycom video conferencing endpoints
 Standalone HDX
 Polycom Group Series 300/500
● Microsoft
 MS Lync (using MS-ICE)
 RTV 720p
● Cisco TelePresence® System (CTS) Versions 1.10 Collaboration Server
 CTS 1300
 CTS 3010
Conferences hosted on the Collaboration Server can include a mix of existing end points (that do not
support TIP) and CTS endpoints.
TIP-enabled endpoints must support TIP Version 7 or higher. Calls from endpoints supporting older versions
of TIP will be rejected.
• Working in the Open Collaboration Server and TIP protocol are supported in AVC Conferencing
Mode only.
• Although Cisco legacy endpoints are inter-operable with Collaboration Server (RMX) 1800 with no
DSP cards, the MCU is not supported for integration into third-party and partner environments.
• Collaboration Server (RMX) 1800 Entry Level is not supported in POCN.
Polycom®, Inc. 1020