Resource Allocation And Capacity - Polycom realpresence 1800 Administrator's Manual

● Recording Links use the default Network Service to connect to conferences, therefore the recording
system must be defined on the default network to enable the recording.

Resource Allocation and Capacity

The Resolution Configuration affect the resource capacity of the MCU. They are reflected in the port gauges
displayed on the Collaboration Server management application's main screen. In Multiple Networks mode,
the overall resources are divided between the Network Services. However, the port gauges do not reflect
the resource availability per Network Service. For more information see
First Time Installation and Configuration
First Time Installation and Configuration of the RealPresence Collaboration Server (RMX) 1800/2000/4000
consists of the following procedures:
1 Preparations:
 Gather Network Equipment and Address Information Get the information needed for integrating
the Collaboration Server into the local network for each of the networks that will be connected to
the Collaboration Server.
 Unpack the Collaboration Server.
 Modify the Management Network parameters on the USB Key.
2 Hardware Installation and Setup:
 Mount the Collaboration Server in a rack.
 Connect the necessary cables.
3 First Entry Power-up and Configuration:
 Power up the Collaboration Server.
 Register the Collaboration Server.
 Connect to the Collaboration Server.
 Configure the Default IP Network Service.
 Configure the ISDN/PSTN Network Service.
 Modify the required System Flag to enable Multiple Services and reset the MCU.
4 Add the required IP Network Services to accommodate the networks connected to the Collaboration
Server.
5 Select a Network Service to act as default for dial out and gateway calls for which the Network
Service was not selected.
6 Place several calls and run conferences to ensure that the system is configured correctly.
For details see First Time Installation and Configuration
Getting Started Guide.
Upgrading to Multiple Services
1 Gather Network Equipment and Address Information for each of the networks that will be connected
to the Collaboration Server unit. For a list of required address, see the Collaboration Server (RMX)
1800/2000/4000 Getting Started Guide, Gather Network Equipment and Address Information.
2 Upgrade to the new version and install the activation key that contains the Multiple Services license
as described in the RealPresence Collaboration Server (RMX) 1800/2000/4000 Release Notes. .
Polycom®, Inc.
Resource
in the Collaboration Server (RMX) 1800/2000/4000
Network Security
Capacity.
548