Content Related Flags - Polycom realpresence 1800 Administrator's Manual

Example:
The default for five participants is indicated by the PREDEFINED_AUTO_LAYOUT_5 system flag, whose
default value is . However, you may select other layouts, with either less or more cells. Should you select
a default layout with two cells for example (such as
one. Should you select a default layout with six cells (such as
the layout cells (two cells remain empty).

Content Related Flags

LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag
The LEGACY_EP_CONTENT_DEFAULT_LAYOUT system flag defines the video layout used in legacy
endpoint when switching to Content mode.
For a list of available layouts see
CS_ENABLE_EPC Flag
Endpoints supporting People+Content (for example, FX endpoints) may require a different signaling when
in content mode. For these endpoints, manually add the flag CS_ENABLE_EPC with the value YES (default
value is NO) to the CS_MODULE_PARAMETERS tab.
Automatic Password Generation Flags
The Collaboration Server can be configured to automatically generate conference and chairperson
passwords when the Conference Password and Chairperson Password fields are left blank.
Guidelines
● If the flag HIDE_CONFERENCE_PASSWORD is set to YES, the automatic generation of passwords
(both conference and chairperson passwords) is disabled, regardless of the settings of the flags
NUMERIC_CONF_PASS_DEFAULT_LEN and NUMERIC_CHAIR_PASS_ DEFAULT _LEN.
● The automatic generation of conference passwords is enabled/disabled by the flag
NUMERIC_CONF_PASS_DEFAULT_LEN.
● The automatic generation of chairperson passwords is enabled/disabled by the flag
NUMERIC_CHAIR_PASS_ DEFAULT _LEN.
● The automatically generated passwords will be numeric and random.
● The passwords are automatically assigned to ongoing conferences, Reservations, and Meeting
Rooms at the end of the creation process (once they are added to the Collaboration Server).
● Automatically assigned passwords can be manually changed through the Conference/Meeting
Room/Reservation Properties dialog boxes.
● Deleting an automatically created password will not cause the system to generate a new password
and the new password must be added manually or the field can be left blank.
● If a password was assigned to the conference via Microsoft Outlook using the PCO add-in, the
system does not change these passwords and additional passwords will not be generated (for
example, if only the conference password was assigned a chairperson password will not be
assigned).
Polycom®, Inc.
Available Layouts.
), you will view only the speaker and the previous
), you will view the participants on four of
System Configuration Flags
810