Polycom realpresence 1800 Administrator's Manual page 754

11 Click Add to add a new Manager terminal.
Depending on the SNMP Trap Version selected, one of the two following New Trap Destination
dialog boxes opens.
12 Define the following parameters:
SNMPv3 - Traps
Field
IP Address
Enable Trap
Inform
Community Name
Polycom®, Inc.
Description
Enter the IP address of the SNMP trap recipient.
An Inform is a Trap that requires receipt confirmation from the entity
receiving the Trap. If the Engine ID field (Version 3) is empty when
Enable Trap Inform has been selected, the Engine ID is set by the
Client.
Enter the Community Name of the manager terminal used to monitor the
MCU activity
Administration and Utilities
Version
1,2,3
1, 2
723