Polycom realpresence 1800 Administrator's Manual page 846

3 When the installation of the RMX Manager is completed, launch the RMX Manager using the
Windows Start menu.)
4 If needed, add the MCU to the RMX Manager's MCUs list (if the MCUs list was not pre-populated
during installation).
a Right-click in the RMX Manager window.
b Select Add MCU.
c Enter the MCU Name.
d Enter the of the MCU IP address.
e Leave the Port as port 80 until the Collaboration Server is set to Ultra Secure Mode.
Polycom, Inc.
Ultra Secure Mode
815