Defining A New Entry Queue - Polycom realpresence 1800 Administrator's Manual

Default Entry Queue properties
The system is shipped with a default Entry Queue whose properties are shown in the following table.
Default Entry Queue Properties
Parameter
Display Name
Routing Name
ID
Profile name
Entry Queue Service
Ad Hoc
Cascade
Enable ISDN/PSTN
Access
Note: Resource Capacities and Operational Specifications
For information about Resource Capacities and other operational specifications, see the
RealPresence® Collaboration Server (RMX) Hardware Guide specific to your system.

Defining a New Entry Queue

You can modify the properties of the default Entry Queue and define additional Entry Queues to suit different
conferencing requirements.
Polycom®, Inc.
Value
DefaultEQ
The user can change the name if required.
DefaultEQ
The default Routing Name cannot be changed.
1000
Factory_Video_Profile. Profile Bit Rate is set to 384 Kbps.
Entry Queue IVR Service. This is default Entry Queue IVR Service shipped with the
system and includes default voice messages and prompts in English.
Enabled
None (Disabled)
Disabled. You can modify the properties of this Entry Queue to enable ISDN/PSTN
participants to dial-in to a conference. Up to two dial-in numbers can be assigned.
Entry Queues, Ad Hoc Conferences and SIP Factories
275