Polycom realpresence 1800 Administrator's Manual page 919

4 Click the Active Alarms tab to view alarms related to the Collaboration Server, i.e. temperatures
and main power sensors.
The Active Alarms dialog box displays fields that relate to faults and errors detected on the
Collaboration Server by sensors. The Active Alarms dialog box is divided into two sections:
Hardware Alarm List and Software Alarm List.
Each section's alarm list can be saved as a *.xls file by clicking the Save Hardware Alarm List and
Save Software Alarm List buttons respectively. Each alarm list color codes the severity of the alarm;
Critical (RED), Major (ORANGE) and Normal (GREEN).
For RMX 2000/4000 systems, if you are connected to the Hardware Monitoring via the Shelf
Management server, the Software Alarm List section will not be displayed.
To view a card properties:
1 In the Hardware Monitor pane, right-click a desired card and select Properties.
Depending on your card type, available properties may vary.
Polycom®, Inc.
Collaboration Server Hardware Monitoring
888