Polycom realpresence 1800 Administrator's Manual page 453

Conference Properties - General
Field
Conferencing Mode
Start Time
End Time
Conference Password
Chairperson Password
ID
Profile
Line Rate
Video Switching
Reserve Resources for
Video Participants
Reserve Resources for
Audio Participants
Max Number of
Participants
Enable ISDN/PSTN
Network Service
ISDN/PSTN Network
Service
Polycom®, Inc.
Description
The conferencing mode set for the conference: CP, VSW, SVC Only, or CP
and SVC.
The time the conference started.
The expected conference end time.
Note: This field is not shown when the conference is set as a Permanent
Conference.
A numeric password for participants to access the conference.
A numeric password used by participants to identify themselves as the
conference chairperson.
The conference ID.
The name of the conference Profile from which conference parameters were
taken.
The maximum transfer rate, in kilobytes per second (Kbps) of the call (video
and audio streams).
When selected, the conference is running in a special conferencing mode
which implies that all participants must connect at the same line rate and the
video parameters are set according to the highest common parameters.
Participants with endpoints not supporting the video parameters (such as the
video protocol, resolution and frame rate) selected for the conference will
connect as secondary (audio only). If HD 1080p is selected for the conference,
endpoints that do not support HD 1080p resolution are connected as
Secondary (Audio Only) participants.
Video layout changes are not enabled during a conference.
Note: Video Switching conferencing mode is unavailable to ISDN participants.
For more information, see
Displays the number of video participants for which the system reserved
resources.
Default: 0 participants.
Displays the number of audio participants for which the system reserved
resources.
Default: 0 participants.
Indicates the total number of participants that can be connected to the
conference. The Automatic setting indicates the maximum number of
participants that can be connected to the MCU according to resource
availability.
When selected, ISDN/PSTN participants can dial into the conference.
When the Enable ISDN/PSTN Network Service is selected, displays the default
Network Service.
Conference and Participant Monitoring
Video Switching (VSW) Conferencing.
422