Manually Adding A System Flag - Polycom realpresence 1800 Administrator's Manual

4 In the New Value field, enter the flag's new value.
5 Click OK to close the Update Flag dialog.
6 Repeat steps 2–5 to modify additional flags.
7 Click OK to close the System Flags dialog.
8 Unless otherwise indicated,
information see Resetting the Collaboration

Manually Adding a System Flag

To add a flag:
1 Open the System Flags dialog as described in the procedure above.
2 Click New Flag.
The New Flag dialog box is displayed.
3 In the New Flag field enter the flag name.
4 In the Value field enter the flag value.
The flags in the Manually Added, Modified, Deleted System Flags table can be manually added
to the MCMS_PARAMETERS_USERS
5 Click OK to close the New Flag dialog.
The new flag is added to the flags list.
6 Click OK to close the System Flags dialog.
Deleting a System Flag
To delete a flag:
1 In the System Flags dialog box, select the flag to delete and click Delete Flag.
2 In the confirmation message box, click Yes to confirm.
Polycom®, Inc.
reset the MCU for flag changes (including deletion) to take effect. For more
Server.
tab.
System Configuration Flags
759