Polycom realpresence 1800 Administrator's Manual page 792

The MCMS System Flags
Flag
ALLOW_NON_ENCRYPT_RECOR
DING_LINK_IN_ENCRYPT_CONF
ALLOW_SIREN7_CODEC
ALWAYS_FORWARD_DTMF_IN_G
W_SESSION_TO_ISDN
ANAT_IP_PROTOCOL
APACHE_KEEP_ALIVE_TIMEOUT
AVOID_VIDEO_LOOP_BACK_IN_C
ASCADE
Polycom®, Inc.
Description
When set to NO (default), the Recording Link inherits the
encryption settings of the conference. If the conference is
encrypted, the recording link will be encrypted.
When set to YES, it disables the encryption of the recording link,
regardless of the Encryption settings of the conference and the
Polycom® RealPresence® Media Suite recorder.
When a Lync server is configured to allow 33Kbps audio rate, Lync
clients connecting the MCU, and using audio rates smaller than
42Kbps, fail, thus disconnecting the call.
To prevent that, Siren7 audio codec is supported by the MCU, and
is the preferred codec for SIP/Lync calls.
Range:
• YES - Siren7 is the preferred audio codec for SIP/Lync calls.
• NO - Siren7 audio codec is not supported.
Default value: NO
Note: No system is required for the flag changed value to take
effect.
When set to YES, all DTMF codes sent by participants in the GW
session will be forwarded to all PSTN and ISDN participants in the
same GW session.
Range: YES / NO
Default Value: NO
If YES, enables Alternative Network Address Types. For more
information, see Alternative Network Address Types
Range: DISABLED, AUTO, PREFER_IPv4, PREFER_IPv6
Default:
• ULTRA SECURE MODE: NO
• STANDARD SECURITY MODE: YES
If the connection is idle for longer than the number of seconds
specified by this flag, the connection to the Collaboration Server is
terminated.
Value: 1 - 999
Default: 15
Default (ULTRA_SECURE_MODE=YES): 15
When set to YES the current speaker's image is not sent back
through the participant link in cascaded conferences with
conference layouts other than 1x1.
Default: YES
Range: YES / NO
System Configuration Flags
Add?




(ANAT).


761