Polycom realpresence 1800 Administrator's Manual page 827

The MCMS System Flags
Flag
SEPARATE_MANAGEMENT_NET
WORK
SESSION_TIMEOUT_IN_MINUTES
SET_AUDIO_CLARITY
SET_AUDIO_PLC
Polycom®, Inc.
Description
Enables/disables the Network Separation. Can only be disabled in
the Ultra Secure Mode (ULTRA_SECURE_MODE=YES).
Default: NO.
If there is no input from the user or if the connection is idle for
longer than the number of minutes specified by this flag, the
connection to the Collaboration Server is terminated.
If the ULTRA_SECURE_MODE = NO:
• Range: 0-999
• Default: 0 (Feature is disabled.)
If the ULTRA_SECURE_MODE = YES:
• Range: 0-999
• Default: 10
Audio Clarity improves received audio from participants connected
via low audio bandwidth connections, by stretching the fidelity of
the narrowband telephone connection to improve call clarity. The
enhancement is applied to the following low bandwidth (4kHz)
audio algorithms:
• G.729a
• G.711
Note:
This flag sets the initial value for Audio Clarity during First-time
Power-up. Thereafter the feature is controlled via the Profile
Properties > Audio Settings dialog box.
Possible Values: ON / OFF
Default: OFF
For more information see
Packet Loss Concealment (PLC) for Siren audio algorithms
improves received audio when packet loss occurs in the network.
The following audio algorithms are supported:
• Siren 7 (mono)
• Siren 14 (mono/stereo)
• Siren 22 (mono/stereo)
Possible Values: ON / OFF
Default: ON
Note: The speaker's endpoint must use a Siren algorithm for
audio compression.
System Configuration Flags
Defining New Profiles.
Add?




796