Polycom realpresence 1800 Administrator's Manual page 815

Collaboration server rmx
Hide thumbs Also See for realpresence 1800:
Table of Contents

Advertisement

The MCMS System Flags
Flag
MIN_H239_HD1080_RATE
MIN_PASSWORD_LENGTH
MIN_PWD_CHANGE_FREQUENC
Y_IN_DAYS
MIN_SYSTEM_DISK_SPACE_TO_
ALERT
MIN_TIP_COMPATIBILITY_LINE_R
ATE
MINIMUM_FRAME_RATE_THRES
HOLD_FOR_SD
MIX_LINK_ENVIRONMENT
Polycom®, Inc.
Description
Used to set the threshold line rate for HD Resolution Content: the
line rate at which the Collaboration Server will send Content at
HD1080 Resolution. Setting the flag to 0 disables HD Resolution
Content.
Default: 768 kbps.
The length of passwords.
Possible value: between 0 and 20.
0 means this rule is not enforced.
For more details, see
Password
Defines the frequency with which a user can change a password.
Values: 0 -7.
0 (standard default) - users do not have to change their
passwords.
For details, see
Defining Password Change
Defines a minimum remaining Collaboration Server disk capacity
in megabytes. If the remaining disk capacity falls below this level
an active alarm is raised.
Default: 2048
This flag determines the minimum line rate at which conferencing
entities such as an Entry Queue or Meeting Room can be
TIP-enabled and TIP-enabled endpoints can connect to them.
CTS version 7 requires a minimum line rate of 1024 kbps and will
reject calls at lower line rates, therefore the System Flag value
should be 1024 kbps or higher.
0 means that no minimum line rate is enforced on the conference
for TIP connectivity.
Default: 1024
Low quality, low frame rate video is prevented from being sent to
endpoints by ensuring that an SD channel is not opened at frame
rates below the specified value.
Range: 0 -30
Default: 15
In H.239-enabled MIH Cascading, when MGC is on level 1, setting
this flag to YES will adjust the line rate of HD Video Switching
conferences run on the RealPresence Collaboration Server (RMX)
1800/2000/4000 from 1920Kbps to 17897, 100bits/sec to match
the actual rate of the HD Video Switching conference running on
the MGC.
Note: If the flag MIX_LINK_ENVIRONMENT is set to YES, the
IP_ENVIRONMENT_LINK flag must be set to NO.
System Configuration Flags
Length.
Frequency.
Add?
784

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realpresence 2000Realpresence 4000

Table of Contents