Polycom realpresence 1800 Administrator's Manual page 674

Conference IVR Service Properties - Gateway General Voice Messages
Message Type
Ringing Tone
Redial on Wrong
Number
Disconnect on Wrong
Number
Disconnect on Busy
Disconnect on No
Answer
11 When defining a gateway IVR Service, it is recommended that the Roll Call option remains
disabled.
12 Click the Video Services tab.
The New Conference IVR Service - Video Services dialog box opens.
13 Define the following parameters:
New Conference IVR Service Properties - Video Services Parameters
Video Services
Click&View
Video Welcome Slide
14 Click the DTMF Codes tab.
The New Conference IVR Service - DTMF Codes dialog box opens.
15 If required, modify the DTMF codes or permissions. For more details see
Service Properties - DTMF
16 Click the Operator Assistance tab.
17 If Operator Assistance will not be available to participants, clear the Enable Operator Assistance
option, which is automatically selected to disable it.
Polycom®, Inc.
Description
The tone that will be played to indicate that the system is calling the destination
number.
The message played when the wrong destination is entered, allowing you to enter a
new number. For details, see
The message played when the wrong destination is entered, followed by a
disconnection tone. For details, see
The tone (or message) played when the dialed destination number is busy. For
details, see Disconnect on
The tone (or message) played when the dialed destination number does not
answer. For details, see
Description
Select this option to enable endpoints to run the Click&View application that enables
participants to select a video layout from their endpoint.
Select the video slide file to be displayed when participants connect to the
conference. To view any slide, click the Preview Slide
If the video slide file was not uploaded to the MCU prior to the IVR Service
definition, click the Add Slide button. The Install File dialog box opens. The
uploading process is similar to the uploading of audio files. For more information,
see step 7.
Notes:
• When using one of the default Polycom slides, the slide will be displayed in the
resolution defined in the profile, i.e. CIF, SD, HD 720p or HD 1080p.
• When defining a gateway IVR Service, the recommended default slide is:
Default_GW_Welcome_Slide.
Codes.
Redial on Wrong Number.
Disconnect on Wrong
Busy.
Disconnect on No Answer
Gateway Calls
Number.
(
) button.
New Conference IVR
643