Polycom realpresence 1800 Administrator's Manual page 801

The MCMS System Flags
Flag
ENABLE_NO_VIDEO_RESOURCE
S_AUDIO_ONLY_MESSAGE
ENABLE_RECORDING_
OPERATION_VIA_SIPINFO
ENABLE_RTP_TRAFFIC_SHAPING
ENABLE_SELECTIVE_MIXING
ENABLE_SIP_PEOPLE_PLUS_CO
NTENT
ENABLE_SIP_PPC_FOR_ALL_USE
R_AGENT
Polycom®, Inc.
Description
Enables playing a voice message that Informs the participant of
the lack of Video Resources in the RealPresence Collaboration
Server and that he/she is being connected as Audio Only.
Default: YES
Allows recording control operations to be performed using either
DTMF tones or a SIP INFO request.
When set to NO: The Collaboration Server will send Recording
Control Operation commands to the Polycom® RealPresence®
Media Suite using DTMF as in all previous version.
When set to YES: The Collaboration Server will send Recording
Control Operation commands to the Media Suite using a SIP INFO
request.
Default: NO
Indicates whether traffic shaping, which is responsible for
flattening packet bursts within 100 msec time intervals, is enabled.
When set to YES, traffic shaping is applied to all ports, resulting in
some port capacity reduction in MCUs with MPMRx cards (see
Capacity Reduction During Traffic
traffic shaping is disabled.
Range: YES, NO
Default: NO
Enables (default) or disables the Automatic muting of noisy AVC
endpoints. For more details, see
Endpoints.
When set to YES, the automatic muting of noisy endpoints can be
enabled or disabled at the conference level in the Conference
Profile - Audio Settings dialog box.
When set to NO, the automatic muting of noisy endpoints is
disabled at the conference level and cannot be enabled in the
Conference Profile - Audio Settings dialog box.
Default: YES
Note: MCU reset is not required when changing the flag value,
though change will apply only for conferences created from that
point onward.
If security is of higher priority than SIP Content sharing, SIP
People+Content can be disabled by setting this System Flag to
NO. (The content management control (BFCP) utilizes an
unsecured channel (60002/TCP) even when SIP TLS is enabled.)
Default: YES
When set to YES, SIP People+Content and BFCP capabilities are
declared with all vendors' endpoints.
Default: YES
Range: YES / NO
System Configuration Flags
Shaping). When set to NO,
Automatic Muting of Noisy
Add?






770