Connect To The Management Network - Polycom realpresence 1800 Administrator's Manual

7 Click the OK button.

Connect to the Management Network

Connection to the Management Network is done using the following procedure.
To connect directly to the Collaboration Server:
1 Using a LAN cable, connect the workstation:
 To the LAN 1 Port on the Collaboration Server (RMX) 1800 back panel.
 To the LAN 2 Port on the Collaboration Server (RMX) 2000/4000 back panel.
Collaboration Server (RMX) 1800
Collaboration Server (RMX) 2000
Collaboration Server (RMX) 4000
2 Connect the power cable and power the Collaboration Server On.
3 Start the Collaboration Server Web Client application on the workstation, by entering the factory
setting Management IP address in the browser's address line and pressing Enter.
Polycom®, Inc.
Appendix G - Configuring Direct Connections to the Collaboration Server
978