Removing An Mcu From The Mcus Pane - Polycom realpresence 1800 Administrator's Manual

a Select the MCU to disconnect and click Disconnect MCU
b Right-click the MCU icon and then click Disconnect MCU.
The MCU icon changes to disconnected and any ongoing conference running on that MCU will not
be monitored in this RMX Manager; they are removed from the Conferences pane. This MCU can
still be monitored and controlled by other users.

Removing an MCU from the MCUs Pane

An MCU can be removed from the RMX Manager. This function should be used if the MCU hardware was
disconnected and removed from the network.
To Remove an MCU from the list:
1 Use one of the following methods:
a Select the MCU to disconnect and click Delete
b Right-click the MCU icon and then click Remove MCU.
A confirmation message is displayed.
2 Click OK to confirm or Cancel to abort the operation.
The MCU icon is removed from the MCUs pane.
Changing the RMX Manager Language
You can change the language of the RMX Manager menus and dialog boxes. Only one language can be
selected at a time and the RMX Manager application must be restarted after changing the display language.
To select a language:
1 On the RMX Manager menu, click Setup > Customize Display Settings > Multilingual Settings.
The Multilingual Settings dialog box opens, displaying the current language selection.
Polycom®, Inc.
RMX Manager Application
.
.
674