Realpresence Collaboration Server (Rmx) Hardware Installation - Polycom realpresence 1800 Administrator's Manual

RealPresence Collaboration Server (RMX) Hardware Installation

When connecting the LAN cables of the various networks to the Collaboration Server it is
recommended to use a color system to differentiate between the networks, for example, using
colored cables.
Collaboration Server (RMX) 4000 Multiple Services Configuration
Collaboration Server (RMX) 4000 Rear Panel with LAN and PRI cables
Collaboration Server (RMX) 4000 rear panel, when one RTM ISDN and three RTM LAN cards are installed
providing IP and ISDN connectivity. The RTM ISDN card can be used for both ISDN and IP calls and only
one IP network Service is associated with each RTM/LAN card.
Collaboration Server (RMX) 4000 Rear Panel with LAN and PRI cables
In this case, up to four different IP Network Services can be defined - one for each RTM LAN/RTM ISDN
cards installed in the system.
If two LAN ports per each installed RTM LAN card are used, up to three additional Network Services can be
defined, bringing it to a total of up to 7 IP Network Services.
Several cards can be assigned to the same IP Network Service. The definition of the network services
attached to the Collaboration Server unit and which cards are assigned to each network service is defined
in the IP Network Service.
Polycom®, Inc.
Network Security
shows the cables connected to the
550