Hw Monitor Pane Toolbar - Polycom realpresence 1800 Administrator's Manual

HW Monitor Pane Status Columns
Field
Status
Temperature
Voltage

HW Monitor Pane Toolbar

The following buttons appear in the tool bar of the Hardware Monitor. Depending on your product model,
available buttons may vary.
HW Monitor Pane Tool Bar Buttons
Button Name
System Reset
System Shut Down
Active Diagnostic Mode
Viewing the Properties of Hardware Components
Depending on your product model, available hardware components may vary. The properties displayed for
the hardware components will vary according to the type of component viewed.Hardware component
properties can be grouped as follows:
● MCU Properties
● Card Properties (MPMRx, CNTL/CNTL 4000, RTM IP, RTM ISDN, DSP card, RTM LAN, RTM-IP
4000)
● Supporting Hardware Components Properties (Backplane, FANS, LAN, PWR)
No properties are provided for Power Supply (PWR). For more information, see your product
Hardware Guide.
Polycom®, Inc.
Description
The current status of the HW component; Normal, Major, Critical, Resetting,
Diagnostics, or Empty.
Monitors the temperature of the hardware components; Normal, Major, and
Critical.
Note: Critical condition invokes a system shut down.
The voltage threshold of the hardware component; either Normal or Major.
Description
Resets and restarts the system. Resetting saves settings and information
that you changed in the system, i.e. IP Services, etc...
Shuts down the system into a standby mode. When the user in the
Collaboration Server Manager/Client presses the System Shut Down
(red) button in the Hardware Monitor tool bar, the system should enter a
standby mode and the LED turns ON. Only the media and control unit
cards are in a standby mode. Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.
Sets the MFA, CPU and switches cards such as /MPMRx, CNTL and
RTM IP into diagnostic mode. For more information, see
Mode.
Collaboration Server Hardware Monitoring
Diagnostic
884