Creating A Cascade Enabled Dial-Out/Dial-In Participant Link - Polycom realpresence 1800 Administrator's Manual

Collaboration server rmx

Hide thumbs Also See for realpresence 1800:

Table of Contents

MIH Cascading – Video Session Mode and Line Rate

RealPresence

Collaboration Server

To establish the links between two RealPresence Collaboration Servers requires the following procedures

be performed:

● Establish the Master-Slave relationships between the cascaded conferences by defining the dialing

● Create the Master and Slave conferences, defining the appropriate line rate.

● Create a cascade-enabled Dial-out Participant link in the Master conference

● Create a cascade-enabled Dial-in Participant link in the Slave conference.

Creating a Cascade Enabled Dial-out/Dial-in Participant Link

The connection between two cascaded conferences is established by a cascade enabled dial-out and dial-in

participants, acting as a cascades link.

The dialing direction determines whether the dial-out participant is defined in the conference running on the

Master MCU or the Slave MCU. For example, if the dialing direction is from the Master conference on level

1 to the Slave conference on level 2, the dial-out participant is defined in the Master conference on level 1

and a dial-in participant is defined in the Slave conference running on the MCU on level 2.

If the cascade-enabled dial-out participant always connects to the same destination conference on the other

(second) MCU, the participant properties can be saved in the Address Book of the MCU for future repeated

use of the cascaded link.

To define the dial-out cascade participant link:

1 In the Conferences pane, select the conference.

Polycom®, Inc.

Video Session Mode

Defining Cascading Conferences

Realpresence 2000 Realpresence 4000